PRODUCTS / STRETCH WRAPPERS / Lantech Q-300XT
- Extended Wrap Height
- Increase the wrap heights of your loads. Replace the 203 cm (80") mast with a 279 cm (110") mast.
220 V - 50/60 Hertz 15 AMP
- Adds a transformer to the machine.
- Operate in temperatures below -1 C to -18 C (+31 F to 0 F).
- Makes a "cable" of film that locks the load to the pallet. The film cable decreases the risk of damage during shipment.
Click-n-Go® Remote Control
- Start or stop the machine from the forklift or other location. Note: You can use the remote for multiple machines.
NEMA 12 Enclosure
- Keeps moisture, dust, and dirt from electrical components.
- Put the load on the turntable with a forklift or a pallet jack.
EZ Weigh™ Integrated Scale
- Weigh and wrap loads in one step with a scale built into the turntable.
- Helps the operator align the load on the turntable.
- It lets the operator put the load on the turntable at floor level. This is available for 1651 mm (65") and 1829 mm (72") turntables. Note: The customer must install this option.
- Increase the length and width of your loads. A turntable with a 1829 mm (72") or 2438 mm (96") diameter is available. Note: The 2438 mm (96") turntable has a maximum of 8 rpm.
- Peak Production Speed: Up to 30-40 loads/hr
- Load Size Diagonal (Recommended): 1750 mm (69")
- Maximum Load Wrap Height: 2032 mm (80")
- Maximum Load Weight: 1814 kg (4000 lbs)
- Turntable Speed (Variable): 12 RPM
- Turntable Size: 1651 mm (65") diameter
- Turntable Drive: 3/4 HP TEFC
Weights and Size
- XT Cut and Clamp 5.0®: Standard
- Auto Film Cut-Off™: Not applicable
- Pallet Grip®: Optional
- Photo-Eye: Intelli-Sensor
- Standard Film Width: 500 mm (20")
- EZ Thread Film Delivery: Standard
- Standard Pre-Stretch: 200%
- Wrap Force: Variable (Electric)
- Film Capacity: 250 mm (10") Roll Diameter
- Film Delivery System: Power Roller-Stretch Plus
- EZ Weigh Integrated Scale: Optional
- NEMA Type 1 Enclosure: Optional
- Approx. Shipping Weight: 658 kg (1450 lbs)
- Size: 3023 mm L; 1702 mm W; 2337 mm; H (119" L x 67" W x 92" H)
- Pneumatic: Not Applicable
- Dedicated Electric Service Req. US: 120 VAC, 20 AMP
- Warranty Duration: 5 Year. Unlimited cycles. All components covered.