PRODUCTS / STRETCH WRAPPERS / Lantech S Automatic

S Automatic Stretch Wrapper

Secures load to pallet, wraps tighter and contains performance monitoring, production and wrap data.
  • 6,000 LB Capacity Conveyor
    • 6,000 lb capacity for Lantech supplied base system. Available in 5' sections. 10' and 12' wrap zone sections. 3" diameter rollers on 3-3/4" centers.

    Cold Package
    • Cold Package option allows efficient operation of stretch wrapper in an environment where the temperature range is +31 to +10 degrees Fahrenheit.

    750 MM Metered Film Delivery System
    • For customer applications where 30" wide film is used.
    ​
    25 RPM Package
    • Wrap arm rotation is increased to 25 RPM. Includes PowerFlex 40 variable frequency drives, additional fencing, visual barriers (Yellow Railroad Gates) at the infeed and exit transition, and a larger machine machine frame.

    35 RPM Package
    • Wrap arm rotation is increased to 35 RPM. Includes PowerFlex 40 variable frequency drives, additional fencing, visual barriers (Yellow Railroad Gates) at the infeed and exit transition, and a larger machine machine frame.

    40 RPM Package
    • Wrap arm rotation is increased to 40 RPM. Includes 9/5/9 standard spaced conveyor layout with variable speed drive control and conveyor speeds of 60-90 FPM (high speed staging). Includes additional fencing and safety light guards.
    ​
    Top Sheet Dispenser
    • Two to four mil poly film, 80" wide is automatically applied over the top of load for moisture and dust protection. In-line top sheet dispenser model applies and secures sheet of film over load as it indexes into the wrap zone with no interruption to the wrapping cycle. Mid-wrap top sheet dispenser applies and secures sheet of film over top of load during the wrapping cycle. Load is protected with five-sided coverage.

    Conveyor Sections
    • Available in 5' sections and 10' and 12' wrap sections. Close-spaced and tight-spaced conveyor rollers. Standard and non-standard pass heights. Includes safety fencing and additional safety photocells mounted on the safety shield.

    Additional Wrap Height Capacity
    • For wrapping loads which exceed the 8-" wrap height capacity of the standard system. Will handle loads up to 110" tall. Increases total operating height to 216" at standard pass height.

    ​
  • Performance
    • Production Speed: 45 - 50 loads per hour
    • Maximum Load Size: 58"L x 58"W x 75"H                                                                     (1473 mm L x 1473 mm W x 1905 mm H)
    • Minimum Load Size: 36"L x 36"W x 27"H                                                                         (914 mm L x 914 mm W x 686 mm H)
    • Maximum Load Weight:  Conveyor Capacity

    Load Handling
    • Wrap Arm Speed: 1 - 15 RPM 
    •  Wrap Arm Drive: DC Drive Motor Control

    Performance Features
    • Pallet Grip®: Standard
    • Load Guardian: N/A
    • Standard Pre-Stretch: 250% (100-300% Available)
    • Film Capacity: 10" D x 20" W (254 mm Diameter, 508 mm Width)
    • Film Delivery System: Power Roller-Stretch
    • Automation Unit - Film Clamp: Load Seeking Clamp and Reach Arm with Impulsed Hot Wire 
    Machine Shipping Weight
    • Approximate Shipping Weight: 8700 lbs (3946 kg)

    Service Requirements
    • Control: PLC with HMI 
    • Enclosure: NEMA 12 enclosure with Disconnect and safety lock-out
    • Dedicated Electric Service Req. US: 230V, 3-ph, 60Hz, Wye w/ Ground
    • Dedicated ELectric Service Req. EU: 3L-PE-400V-50 Hz-No Neutral
    • Pneumatic: 85-142 lpm @ 6 Bar, 3-5 cfm @ 80 Psi, Clean Dry Air

    Warranty
    • Warranty Duration: 3 Years, Unlimited Cycles