© 2019 by Gamma. Proudly created with Wix.com

Lantech Q-300

The Q-300 is Lantech's most versitile and popular stretch wrapper! It wraps large, tall, heavy, or fragile loads including doors, windows and more.

 

It's our goal that you're completely satisfied with the purchase of your equipment. Therefore, we will work together to determine the optimal options, supplies, installation methods, and training that best serves your application, budget and quality standards. 

 

How to buy:

  • Speak to a Representative - Call (913) 780-5666 or email AmbroseCRT@ambroseco.com
  • Fill out a quote request online

Extended Wrap Height

Increase the wrap heights of your loads. Replace the 203 cm (80") mast with a 279 cm (110") mast.

 

220 V - 50/60 Hertz 15 AMP

Adds a transformer to the machine.

 

Cold Environment

Operate in temperatures below -1 C to -18 C (31+ F to 0 F).

 

Corrosive Environment

Operate in a corrosive environment. It is for machines with exposure to agents such as salt and fertilizer.

 

Freezer Environment

Operate in temperatures of -29 C (-20 F).

 

"Non-Powered" Turntable Conveyor

The maximum load weight is 1814 kg (4000 lb.). The maximum load dimensions are 1702 mm L x 1321 mm W x 1905 mm H (67" x 52" x 75"). The passing height is 178 mm (7").

 

Auto Film Cut-Off™

Automatically cuts the film at the end of the wrap cycle. This decreases labor on each load by approximately 30 seconds.

 

Pallet Grip®

Makes a "cable" of film that locks the load to the pallet. The film cable decreases the risk of damage during shipment.

 

NEMA 12 Enclosure

Keeps moisture, dust, and dirt from electrical components.

 

Ramp

Put the load on the turntable with a forklift or pallet jack.

 

EZ Weigh™ Integrated Scale

Weigh and wrap loads in one step with a scale built into the turntable.

 

Forklift Stop

Helps the operator align the load on the turntable.

 

Pit Mount

It lets the operator put the load on the turntable at floor level. This is available for 1651 mm (65") and 1829 mm (72") turntables. Note: The customer must install this option.

 

Oversized Turntable

Increase the length and width of your loads. A turntable with a 1829 mm (72") or 2438 mm (96") diameter is available. Note: The 2438 mm (96") turntable has a maximum of 8 rpm.

 

Turntable Washdown

Use water at "city pressure" to clean the turntable. Make sure that the water can drain from the area.

 

Dual Turntable

Add a second turntable to increase efficiency. The operator can start the wrap cycle on the first turntable and put a load on the second turntable.

 

Netting Film Delivery System (FDS)

Applies stretchable and non-stretchable netting. This is for loads that have a requirement for ventilation. Note: This FDS cannot use the standard stretch films.

 

Power Roller Stretch Plus - Film Delivery System (FDS)

Senses and adjusts the wrap force to the changes in the tension in the film. It is for a turntable speed more than 12 rpm, for very light or fragile loads, or for exact control of the wrap force.